aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-04tinymix: Remove the unused parameter from tinymix_set_byte_ctl()Samreen Nilofer
The control pointer is not used in the tinymix_set_byte_ctl(), hence removing it. Signed-off-by: Samreen Nilofer <samreen.nilofer@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-04tinymix: Support more that 512 bytes in byte controlSamreen Nilofer
The set/get byte control support more than 512 bytes. This is utilized by tlv type controls. Signed-off-by: Samreen Nilofer <samreen.nilofer@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-04mixer: add support for TLV based byte controlsMythri P K
Add tinyasla support for bytes controls with TLV type Signed-off-by: Mythri P K <mythri.p.k@intel.com> Signed-off-by: Samreen Nilofer <samreen.nilofer@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-04Merge pull request #50 from charleskeepax/masterSimon Wilson
Revert "mixer: Control input value in mixer_ctl_set_value"
2014-09-04Merge pull request #49 from vinodkoul/fixesSimon Wilson
Allow setting of single byte control and make error from percent_to_int more consistent.
2014-08-18Revert "mixer: Control input value in mixer_ctl_set_value"Charles Keepax
This reverts commit 0e07647e4b9c52bb5f3766f9564ed38b6030e556. This commit disables reporting of an error when somebody requests an out of range value from a control which seems like a bad goal to start with, if something invalid is requested we should return an error not set things to the nearest valid state. Secondly since mixer_ctl_get_range_max returns an error for all control types except TYPE_INTEGER, all controls that are not integers will be set to -EINVAL with this patch included. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-08-12tinyalsa: unable to set BYTE mixerDavid.Coutherut
tinyalsa set mixer function didn't support BYTE element type Add BYTE element type support Change-Id: I95d1d82150805f16cc5103bac9c9c9500210bbbf Signed-off-by: David Coutherut <davidx.coutherut@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-12Tinyalsa: standardize error message for wrong input valueBaptiste Robert
Currently, if a user sets a mixer with a percentage value greater than the maximum, tinyalsa does not inform the user about this "error" and silently replaces the user's value by the maximum. However, if a user sets a mixer with an integer value greater than the maximum, tinyalsa informs the user with an error. This patch purpose is to define the same behaviour in both quoted cases: user is informed through an error. Change-Id: I79547758266d1eb08a65d7b1355ec9859f3b27bb Signed-off-by: Baptiste Robert <baptistex.robert@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-03Update tinypcminfo to display format informationAndy Hung
Change-Id: I0e6a04da5a4b122a3748b16c7eb01c4a224c3d84 Signed-off-by: Andy Hung <hunga@google.com>
2014-06-03Merge pull request #34 from elaurent/masterSimon Wilson
add support for mmap read
2014-05-08Merge pull request #33 from gkasten/CL_avsyncSimon Wilson
pcm_get_htimestamp can now use CLOCK_MONOTONIC
2014-05-07Merge pull request #40 from dawagner/check-mixer-input-valueSimon Wilson
Mixer: Check validity of input value
2014-05-07Merge branch 'charleskeepax-master'Simon Wilson
2014-05-07Merge branch 'master' of git://github.com/charleskeepax/tinyalsa into ↵Simon Wilson
charleskeepax-master Conflicts: tinymix.c
2014-05-06Mixer: Check validity of input valueBaptiste Robert
When the user wants to set a mixer with a value greater than the maximum or smaller than the minimum, the mixer is set at an undefined value. This patch set purpose is to return a error if the input value is out of range. Signed-off-by: Baptiste Robert <baptistex.robert@intel.com> Signed-off-by: David Wagner <david.wagner@intel.com> Author-Tracking-BZ: 129089
2014-05-06Merge pull request #31 from rfvirgil/masterSimon Wilson
tinycap: support streaming captured PCM to stdout
2014-05-06mixer: Control input value in mixer_ctl_set_valueAndroidict
When user want to set a mixer control with a value out of range, the mixer control will be set at its maximum
2014-05-06Merge pull request #23 from roml/cleanupSimon Wilson
Clean up asoundlib.h header file
2014-05-06Merge pull request #21 from quantumdream/masterSimon Wilson
Setting binary controls
2014-04-30Merge pull request #39 from dawagner/separate-pcm-prepareSimon Wilson
Add separate call for pcm prepare
2014-04-29tinyalsa: add separate call for pcm prepareOmair Mohammed Abdullah
Tinyalsa combines PREPARE and START calls to the driver in the pcm_start() function. Typically, this is needed for making a driver allocating hardware resources that are not related to a PCM stream. Change-Id: Ic83fad784936bbebab28e8e425debd449182db88 Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah@linux.intel.com> Signed-off-by: David Wagner <david.wagner@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> Signed-off-by: Jack Ren <jack.ren@intel.com> Author-Tracking-BZ: 73509
2013-11-19tinymix: Improve detect of integer valuesCharles Keepax
Tinymix detected integer values when setting controls simply by calling isdigit on the first character of the value being set. This causes problems with enumerated controls whos values start with digits. This patch improves this to provide more robust detection of integer values.
2013-10-30tinymix: Add support for setting/getting a binary controlDimitris Papastamos
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
2013-09-27add support for mmap readEric Laurent
2013-09-03pcm_get_htimestamp can now use CLOCK_MONOTONICGlenn Kasten
Previously the timebase was not documented. Now a new pcm_open flag can be used to specify the clock. If flag PCM_MONOTONIC is specified, then pcm_open uses SNDRV_PCM_IOCTL_TTSTAMP with parameter SNDRV_PCM_TSTAMP_TYPE_MONOTONIC to request timestamps in CLOCK_MONOTONIC. Change-Id: I40ce359cb38d686cbb2521fb0602a8a17ab4f925
2013-08-13tinycap: support streaming captured PCM to stdoutRichard Fitzgerald
It is sometimes useful for testing to be able to stream the captured PCM to another tool instead of being forced to save it to a WAV file. Using '--' instead of the target filename will send the raw PCM to stdout (without any header). Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
2013-07-17tinymix: only print mixer name for full mixer dumpSimon Wilson
2013-07-17tinycap: support 24 bit captureSimon Wilson
2013-07-17pcm: support S24_LE formatSimon Wilson
S24_LE is 24 bit audio in a 32 bit sample size. Also make the pcm_format_to_bits() function part of the API since it will be required for tinycap.
2013-06-28mixer: add mixer_get_name() APISimon Wilson
2013-06-28mixer: add mixer_ctl_update() APISimon Wilson
Some sound cards update their controls due to external events, such as HDMI EDID byte data changing when an HDMI cable is connected. This API allows the count of elements to be updated.
2013-05-07mixer: add get/set_array APISimon Wilson
This replaces (and extends) the existing get/set_bytes API, which is no longer required.
2013-04-30tinycap: convert size from frames to bytesceskobassman
2012-12-18Clean up asoundlib.h header fileRom Lemarchand
Remove unused constants and unimplemented functions.
2012-12-14Merge pull request #22 from roml/errmsgSimon Wilson
tinyplay: Make error messages more meaningful
2012-12-14Makefile: remove tinypcminfo during cleanSimon Wilson
2012-12-14tinyplay: Make error messages more meaningfulRom Lemarchand
Compare file parameters with device capabilities and print out the reason(s) why a certain file couldn't be played.
2012-12-03Add tinypcminfo utilitySimon Wilson
This uses the new pcm_params_* API.
2012-12-03pcm: add pcm_get_params APISimon Wilson
This enables the capabilities of any given PCM to be queried. Created with input from Priyesh Bisla and Gabriel Beddingfield.
2012-11-09Add -Wall to Makefile and fix warningsSimon Wilson
2012-11-09tinyplay: add clean shutdown handler for ctrl-cLiam Girdwood
Shutdown gracefully on ctrl-c signals
2012-11-09Merge pull request #15 from quantumdream/masterSimon Wilson
Add mixer_ctl_{get,set}_data()
2012-11-09tinymix: Add support for passing control nameMisael Lopez Cruz
Allow mixer controls to be accessed through the name, not only by id.
2012-10-24tinyalsa: Add a CROSS_COMPILE variable in the MakefileDimitris Papastamos
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2012-10-24mixer: Add mixer_ctl_{set,get}_bytes()Dimitris Papastamos
For binary controls we don't want to go through mixer_ctl_{set,get}_value() as that will trigger many calls to our get()/put() callback in the kernel. Set the entire payload at once and trigger the get()/put() callback once. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2012-10-22Merge pull request #16 from PeterMalkin/masterSimon Wilson
Correctly fill the value for riff chunk size in the WAV file produced by tinycap
2012-10-22Add pcm_wait() to the tinyalsa API.Gabriel M. Beddingfield
2012-10-22tinyplay: Add missing header file <string.h>Gabriel M. Beddingfield
2012-10-22Fix several 'symbol defined but not used' warnings.Gabriel M. Beddingfield
2012-10-22pcm: Add support for S8 and S24LE formats.Gabriel M. Beddingfield
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 00:57:26 +0000